Section 1 - Introduction and Policies

• Maintenance Division Responsibilities and Information
• UPEI Health and Safety Policy
• Facilities Management Health & Safety Committee Mission statement
• Facilities Management H&S Committee Membership List
• Communication and Training
• Area Leader Information
• Guideline for reporting H&S concerns
• Protocol for Exercising your Right to Refuse Unsafe Work

Section 2 - Hazard Assessments

• Hazard Identification, Assessment and Controls

Section 3 - Safe Work Practices and Procedures

1 Automotive Vehicles and Construction Equipment
2 Contractor Safety Management
3 Renovation Guidelines
4 Explosive Powder Actuated Tools
5 Hand Held Circular Saws
6 Power Cutting Equipment – Electric
7 Pest Control Products
8 Proper Lifting Practices and Hoisting
9 Scaffolding
10 Ladders Fixed and Portable
11 Aerial Lifts (Zoom Boom)
12 Use of Compressed Air
13 Defective Tools
14 Use of Fire Extinguishers
15 Heat Stress
16 Portable Welders and Diesel Generators
17 Use of Portable Grinders
18 Storage and Handling of Compressed Gas
19 Welding in Confined Spaces
20 Procedure for Entering Manholes
21 Confined Space Policy and Procedures
22 Use of Solvents and Flammables
23 Use of Chain Saw
24 Grass Trimmers and Brush Cutters
25 Power Lawn Mowers
26 Riding Lawn Mowers
27 Tree Trimming
28 Moving Barrels and Drums
29 Use of Tiger Torches
30 Eye Wash Stations
31 General Office Safety
32 Use of Propane
33 Rigging and Hoisting
34 Trenches
35 Use of Table Saw
36 Extension Cords
37 Tools-Pneumatic
38 Forklift
39 Cell Phones in Vehicles

Section 4 - Safe Work Procedures

1 Lockout/Tagout
2 Use of Meters
3 Installing Interior Lighting Fixtures in T- bar
4 Installing Dry Type Transformers
5 Working From Heights, Boom, Bucket Truck
6 Lockout and Isolation of Electrical System
7 Installing Rigid PVC Conduit Systems
8 Installing Fire Alarm Panels & Devices
9 Installing Branch Circuit Wiring Using AC-90 Cable Including Mounting Of Outlet Boxes And Devices
10 Working With PVC & EMT Conduit
11 Installing Switch-Gear and Panel Boards
12 Installing Light Standards, Pole Top Fixtures
13 Installing EMT Conduit Systems
14 Installing Branch Circuit & Feeder conductor in a conduit system
15 Installing Surface Mounted Fixtures
16 Installing Interior Suspended Light Fixtures using Hangers
17 Installing Emergency Lighting & Exit Lighting
18 Working on Live Equipment 600V or less
19 Operation of Portable Cut-off Saw
20 Power Threader
21 Controlled Products
22 Oxygen and Acetylene

Section 5 - Personal Protection Equipment (PPE)

1 PPE Policy Equipment Hazard Assessment Certification
2 PPE Head Protection
3 PPE Respirators
4 PPE Safety Vest, Hand and Hearing Protection
5 PPE Footwear
6 PPE Eye and Face Protection
7 PPE Full Body Harness

Section 6 - Safety Training Policy

1 Communication and Training
2 What is WHMIS
3 Frequently Asked Questions
4 Workplace Hazardous Material Information
5 WHMIS online notice sept 06
6 WHMIS notice supervisors area Leaders May08
7 Supervisor's New Employee Checklist
8 Working Alone
9 Emergency Preparedness
10 Emergency Procedures
11 Indoor Air Quality Form
12 Campus Alone

Section 7 Inspections

1 UPEI Inspection Procedures and Follow-up
2 Workplace Inspection checklist
3 UPEI Facilities Management Workplace Inspection Report
4 UPEI Health & Safety Inspection Form Generic

Section 8 - Incident Reporting and Investigation

1 Incident Reporting & Investigations
2 Incidents/ Accident Reports
3 Management System Administration

Section 9 - Waste Management Policy & Disposal Protocol

1 Storage Policy & Form
2 UPEI Waste Disposal Protocol

Section 10 - Miscellaneous Forms and Safety Tips

1 Confined Space Tunnel Form
2 Health & Safety For Action Form
3 Hot Work Permit
4 Storage Form

Section 11 - Fall Protection Policy

1 FALL PROTECTION POLICY Feb 2008